산업용 바퀴 및 지지대 조립

JW1605 1500 lb 6 Inch Double Solid Wheel Jack

JW1605 1500 lb 6 Inch Double Solid Wheel Jack for B2B equipment or trailer support projects. Specify the fit-controlling interface, duty and quantity for quotation.

모델
JW1605

짐
1500파운드

Lifting height
10 in

Pipe size
51 / 44 mm

이 구성을 요청하세요

Where JW1605 1500 lb 6 Inch Double Solid Wheel Jack fits in a selection

The practical value of JW1605 1500 lb 6 Inch Double Solid Wheel Jack appears only when the specification is tied to the equipment that must move, the floor it runs on and the interface that carries the load.

Within trailer support where a double solid wheel and 1500 lb class jack are required with confirmed clamp and stowed-clearance dimensions, the actual carried load, wheel/ground contact and attachment geometry should be treated as the first engineering checkpoint. Once that is known, wheel diameter, width, material, bearing arrangement and mounting details can be reviewed in a rational order.

Avoid assuming that a larger wheel, harder polymer or heavier bracket automatically solves the problem. A wheel can fit visually and still fail to match the axle, bracket, stowed envelope or duty cycle. The safest RFQ therefore records total equipment weight, supporting points, floor condition, axle or bracket measurements, expected manoeuvring and quantity before a configuration is released for quotation. For JW1605 1500 lb 6 Inch Double Solid Wheel Jack, keep Model JW1605 and Load 1500 lb attached to this review so a value from another size or assembly is not substituted during quotation.

JW1605 1500 lb 6 Inch Double Solid Wheel Jack product family context

Known configuration details for JW1605 1500 lb 6 Inch Double Solid Wheel Jack

JW1605 1500 lb 6 Inch Double Solid Wheel Jack is presented as a procurement-ready configuration rather than a one-number commodity. Verified details for this item include model: JW1605, load: 1500 lb, lifting height: 10 in. Any interface or performance value that is not listed should be confirmed against the equipment before quotation.

For replacement work, photograph the existing assembly from the side and mounting face, then record wheel diameter, wheel width, hub or axle dimensions, overall installed height and nearby clearance. For a new design, include the drawing or mounting envelope. For JW1605 1500 lb 6 Inch Double Solid Wheel Jack, keep Model JW1605 and Load 1500 lb attached to this review so a value from another size or assembly is not substituted during quotation.

Verified specification data for JW1605 1500 lb 6 Inch Double Solid Wheel Jack

이 표는 현재 구성 정보와 프로젝트 확인이 필요한 항목을 구분합니다. 표에 표시되지 않은 항목은 명확하게 표시된 확인 지점보다 더 큰 위험을 초래합니다.

매개변수	현재 구성
모델	JW1605
짐	1500파운드
Lifting height	10 in
Pipe size	51 / 44 mm
Pipe wall thickness	2 mm
바퀴	6 in double solid wheel
Surface	Zinc plated
Hardware	Included with the listed configuration

Duty conditions to review for JW1605 1500 lb 6 Inch Double Solid Wheel Jack

Trailer support where a double solid wheel and 1500 lb class jack are required with confirmed clamp and stowed-clearance dimensions. Selection should still account for floor joints, ramps, side loads, impacts and periods of stationary load. Where the wheel is part of a trailer support assembly, separate the vertical support task from manoeuvring effort and check that the jack can retract or fold without striking the drawbar, coupling or ground.

For equipment carts, usable load per wheel may not equal total load divided by wheel count if the floor is uneven or the frame is not perfectly rigid. For JW1605 1500 lb 6 Inch Double Solid Wheel Jack, keep Model JW1605 and Load 1500 lb attached to this review so a value from another size or assembly is not substituted during quotation.

JW1605 1500 lb 6 Inch Double Solid Wheel Jack application context

Load and movement checks for this jockey/support assembly — JW1605 1500 lb 6 Inch Double Solid Wheel Jack

Start with equipment dead weight, maximum payload and the number of wheels that reliably support the frame. Add an application-appropriate allowance for uneven load sharing, floor transitions and impact. For trailer jacks, distinguish the static nose or drawbar load from the effort required to manoeuvre the trailer. For JW1605 1500 lb 6 Inch Double Solid Wheel Jack, keep Model JW1605 and Load 1500 lb attached to this review so a value from another size or assembly is not substituted during quotation.

Wheel diameter influences obstacle crossing and clearance, while material and bearing choice influence rolling behaviour. None of those variables substitutes for the actual rating of the selected assembly. For JW1605 1500 lb 6 Inch Double Solid Wheel Jack, keep Model JW1605 and Load 1500 lb attached to this review so a value from another size or assembly is not substituted during quotation.

Installation interface checks for JW1605 1500 lb 6 Inch Double Solid Wheel Jack

Before release, compare the mounting interface against the equipment. For a loose wheel this means bore or bearing type, axle diameter, hub length, spacers and side clearance. For a jockey or guide-wheel assembly it also includes tube diameter, clamp or plate geometry, fastener access, crank clearance, retracted height and the path used when the assembly swivels or folds. For JW1605 1500 lb 6 Inch Double Solid Wheel Jack, keep Model JW1605 and Load 1500 lb attached to this review so a value from another size or assembly is not substituted during quotation.

설계 당시 고려되지 않은 연결 부위라면, 임시방편으로 만든 스페이서를 사용하여 억지로 끼워 맞추지 마십시오. 정렬 불량은 베어링에 측면 하중을 발생시켜 마찰과 조기 마모를 초래할 수 있습니다.

Material and surface conditions for this jockey/support assembly — JW1605 1500 lb

Polymer wheel material should be considered together with floor, contamination, cleaning chemicals, noise expectations and temperature. Nylon and polypropylene are hard thermoplastic families, but exact grade and operating environment still matter. Where the listed configuration specifies a galvanized bracket or tube, that finish applies to the stated configuration only. For JW1605 1500 lb 6 Inch Double Solid Wheel Jack, keep Model JW1605 and Load 1500 lb attached to this review so a value from another size or assembly is not substituted during quotation.

바닥 표시, 세척제 화학 물질, 전기적 특성 또는 특수한 온도 조건이 중요한 경우, 해당 사항을 명확하게 명시하십시오. 이러한 요구 사항은 휠 색상에서 추론해서는 안 됩니다.

Incoming and installation checks for JW1605 1500 lb 6 Inch Double Solid Wheel Jack

On receipt, compare the product against approved dimensions and configuration. Check that the wheel rotates without binding, the bore or bearing seats correctly, fasteners are present where specified and the fork or bracket is free from visible deformation. For a jack assembly, operate the crank through usable travel without load first and confirm folding or swivel movement clears the equipment. For JW1605 1500 lb 6 Inch Double Solid Wheel Jack, keep Model JW1605 and Load 1500 lb attached to this review so a value from another size or assembly is not substituted during quotation.

During commissioning, observe the assembly on the real floor at low speed. Look for rubbing, unusual side movement, loose hardware, wheel wobble and interference with guards or frames. For JW1605 1500 lb 6 Inch Double Solid Wheel Jack, keep Model JW1605 and Load 1500 lb attached to this review so a value from another size or assembly is not substituted during quotation.

Information to include when quoting JW1605 1500 lb 6 Inch Double Solid Wheel Jack

제품명 또는 기존 모델 참조 번호(가능한 경우)
분리형 휠의 경우 휠 직경, 너비, 내경/베어링 및 허브 길이
완전 조립품에 필요한 튜브, 클램프, 플레이트, 볼트 구멍 또는 차축 치수
최대 장비 중량, 적재 용량 및 지지 바퀴 수
바닥 또는 지면, 장애물, 화학 물질 및 브레이크 요구 사항
필요한 수량, 목적지 및 도면이나 사진

보다 폭넓은 선택 지침을 보려면 다음을 참조하십시오. 캐스터 및 휠 선택 가이드, 그 측정 가이드 그리고 관련 제품군.

엔지니어링 검토

Installation and operating review for JW1605 1500 lb 6 Inch Double Solid Wheel Jack

제시된 사양을 출발점으로 삼고, 제품명만으로는 답할 수 없는 적합성 및 작동 관련 질문들을 해결해 나가십시오.

Confirm the fit-controlling interface for JW1605 1500 lb 6 Inch Double Solid Wheel Jack

Treat JW1605 1500 lb 6 Inch Double Solid Wheel Jack as a complete support assembly rather than selecting from wheel diameter alone. The currently listed configuration is Model: JW1605; Load: 1500 lb; Lifting height: 10 in; Pipe size: 51 / 44 mm; Pipe wall thickness: 2 mm; Wheel: 6 in double solid wheel. These values identify the represented item; they do not replace measurements of the trailer or equipment interface.

Before quotation, record the tube, clamp, bracket or plate geometry that locates the assembly. Check crank access, retracted or stowed clearance, and the path the unit follows if it swivels, folds or lifts. For replacement work, photograph the existing mounting before removal so the relationship between fasteners, support tube and surrounding structure remains visible. For JW1605 1500 lb 6 Inch Double Solid Wheel Jack, keep Model JW1605 and Load 1500 lb attached to this review so a value from another size or assembly is not substituted during quotation.

JW1605 1500 lb 6 Inch Double Solid Wheel Jack fit and measurement review

Match JW1605 1500 lb 6 Inch Double Solid Wheel Jack to the real operating condition

Separate the vertical support task from manoeuvring. A listed jack or assembly load belongs to that represented configuration, while real suitability still depends on the actual nose or support load, ground condition, movement pattern and installation. Concrete, paving, gravel and soft ground can change steering effort and the way a small support wheel crosses surface irregularities. For JW1605 1500 lb 6 Inch Double Solid Wheel Jack, keep Model JW1605 and Load 1500 lb attached to this review so a value from another size or assembly is not substituted during quotation.

The paired-wheel arrangement also changes lateral clearance. Confirm total outside width, fork spacing and the closest point to the drawbar or frame through the expected steering or stowing movement. On uneven ground, observe whether both wheels remain free to rotate without one tread rubbing the bracket or carrying the whole load unexpectedly. For JW1605 1500 lb 6 Inch Double Solid Wheel Jack, keep Model JW1605 and Load 1500 lb attached to this review so a value from another size or assembly is not substituted during quotation.

JW1605 1500 lb 6 Inch Double Solid Wheel Jack operating context

Check the first installation of JW1605 1500 lb 6 Inch Double Solid Wheel Jack

Before installation, compare the received unit with the approved dimensions and configuration. Operate moving parts without load first, confirm that the wheel turns freely, and look for visible deformation, damaged threads, missing fasteners or transport damage. Install with the hardware and retention method intended for the equipment rather than compensating for a near-fit with improvised spacers or forced alignment. For JW1605 1500 lb 6 Inch Double Solid Wheel Jack, keep Model JW1605 and Load 1500 lb attached to this review so a value from another size or assembly is not substituted during quotation.

After installation, lower the equipment gradually and observe the assembly under a controlled load. Check that the wheel tracks without rubbing, the support tube remains aligned, fasteners stay seated and the handle or control retains adequate clearance. A short low-speed trial on the actual surface provides more useful acceptance information than spinning the wheel by hand. For JW1605 1500 lb 6 Inch Double Solid Wheel Jack, keep Model JW1605 and Load 1500 lb attached to this review so a value from another size or assembly is not substituted during quotation.

JW1605 1500 lb 6 Inch Double Solid Wheel Jack inspection and installation review

Build the JW1605 1500 lb 6 Inch Double Solid Wheel Jack RFQ around measured data

For quotation, keep the represented configuration separate from the equipment-side values that still need confirmation. The current configuration records Model: JW1605; Load: 1500 lb; Lifting height: 10 in; Pipe size: 51 / 44 mm; Pipe wall thickness: 2 mm; Wheel: 6 in double solid wheel; Surface: Zinc plated. These values identify JW1605 1500 lb 6 Inch Double Solid Wheel Jack; they do not establish every mounting dimension, travel limit, duty condition or compatibility point unless those values are also listed.

Complete support assemblies are often rejected for practical fit reasons rather than because a product family is wrong. A tube can be close but not clamp correctly, a handle can lose access when the equipment is loaded, or a wheel can have adequate diameter yet interfere during folding or steering. Show the mounting area, state the actual support condition and identify the ground surface and any envelope that must remain clear. For JW1605 1500 lb 6 Inch Double Solid Wheel Jack, keep Model JW1605 and Load 1500 lb attached to this review so a value from another size or assembly is not substituted during quotation.

For replacement work, include one photograph before removal and one dimensioned sketch. For a new design, include the interface drawing or available installation space. This lets the configuration be reviewed as part of the surrounding structure instead of from wheel appearance alone. Unknown values should remain explicit confirmation points so the quotation does not silently inherit dimensions from another size or series. For JW1605 1500 lb 6 Inch Double Solid Wheel Jack, keep Model JW1605 and Load 1500 lb attached to this review so a value from another size or assembly is not substituted during quotation.

JW1605 1500 lb 6 Inch Double Solid Wheel Jack quotation and selection boundary

Questions about JW1605 1500 lb 6 Inch Double Solid Wheel Jack

사진만 보고 인용할 수 있나요?

사진은 식별에 도움이 되지만, 정확한 견적을 위해서는 일반적으로 적합성을 결정하는 치수와 하중 및 수량이 필요합니다.

휠 재질을 변경할 수 있나요?

일부 제품군은 자재 변경이 가능할 수 있지만, 등급, 하중, 바닥 및 공정 최소 기준을 재검토해야 합니다.

교체 부품이 제대로 맞는지 어떻게 확인해야 할까요?

가능하다면 기존 장치를 제거하기 전에 측정하고, 설치된 높이와 여유 공간, 그리고 휠 크기를 비교하십시오.

제품 선택에 있어 정격 하중 정보 하나만으로 충분할까요?

아니요. 하중은 필수적이지만, 설치 위치, 바닥, 휠 재질, 직경, 베어링 배열 및 작동 주기 또한 중요합니다.

Request a quote for JW1605 1500 lb 6 Inch Double Solid Wheel Jack

견적을 내기 전에 적합성 관련 세부 사항을 검토할 수 있도록 치수, 용도 및 수량을 보내주십시오.

견적 요청