Request a Plastic Wheel or Jockey Wheel Quote
Send the dimensions, application and quantity you already know. The form at the bottom is the fastest way to structure an RFQ.
What to send with your enquiry
A useful RFQ does not need to be perfect, but it should identify the equipment and dimensions controlling fit. Include a drawing when available. For replacement work, photograph the existing product before removing it and show the mounting face as well as the wheel.
- Product/model reference if known
- Wheel diameter and width
- Bore, bearing, hub length or axle details
- Plate, tube, clamp or stem dimensions
- Maximum load and supporting-wheel count
- Floor/ground and movement pattern
- Brake/folding/control requirement
- Quantity and destination
Gunakan measurement guide, compare product families, or review the jockey wheel guide.
Commercial fit before detailed quotation
Panduan kuantiti pesanan
Komponen katalog standard disebut harga berdasarkan kuantiti yang sesuai dengan pengeluaran. Pemasangan yang lebih besar atau bernilai lebih tinggi boleh disemak mengikut nilai pesanan. Bagi projek baharu, 1-5 sampel penilaian berbayar boleh dipertimbangkan apabila diperlukan untuk semakan kesesuaian atau teknikal. Model campuran boleh disatukan ke arah jumlah nilai pesanan sebanyak USD 1,500. Bahan, perkakas, kemasan atau proses khas mungkin memerlukan minimum khusus proses. Kami memberi tumpuan kepada pesanan projek dan pengeluaran B2B dan bukannya pembelian runcit 1-2 keping.
Contact details
Korea Ever-Power Plastic Castor Co., Ltd.
Sandan-ro | Danwon-gu | Ansan-si | Gyeonggi-do | Korea
Use the RFQ form below for drawings, photos, model lists and project notes.
What happens after you send the RFQ
The first review establishes product family, fit-controlling dimensions, material or finish requirements, load and quantity. If a critical dimension is missing, the next step is to request that dimension rather than assume it. Once the technical boundary is clear, quotation can distinguish standard configurations from special material or process requirements.
Location
Our stated business location is in Danwon-gu, Ansan-si, Gyeonggi-do, Korea. Use the map for geographic reference and the sales email or RFQ form for project communication.
RFQ questions
Do you need a drawing for every enquiry?
Not always. Clear dimensioned photos may be enough for initial review, but fit-critical interfaces should be measured before order release.
Can I request several models together?
Yes. Keep each model and quantity separate.
Can I request 1-5 pieces?
Paid evaluation samples may be considered for a new project when they support fit or technical evaluation. This differs from retail ordering.
Where is the enquiry form?
The global RFQ form is directly below in the footer section of this page and every other public page.
