工业车轮及支撑组件

6 Inch PP Brakeable Jockey Wheel Assembly

Name: 6 Inch PP Brakeable Jockey Wheel Assembly | PlasticCastors.com
SKU: PC-JK-6PP-BRK

6 Inch PP Brakeable Jockey Wheel Assembly for B2B equipment or trailer support projects. Specify the fit-controlling interface, duty and quantity for quotation.

车轮
6英寸PP轮

车轮直径/宽度
150 x 50 毫米轮子

Series context
1200 lb jockey-jack group

手术
侧风

请求此配置

Where 6 Inch PP Brakeable Jockey Wheel Assembly fits in a selection

The practical value of 6 Inch PP Brakeable Jockey Wheel Assembly appears only when the specification is tied to the equipment that must move, the floor it runs on and the interface that carries the load.

Within trailer drawbar support where parking control at the wheel is required and mounting-board dimensions are confirmed, the actual carried load, wheel/ground contact and attachment geometry should be treated as the first engineering checkpoint. Once that is known, wheel diameter, width, material, bearing arrangement and mounting details can be reviewed in a rational order.

Avoid assuming that a larger wheel, harder polymer or heavier bracket automatically solves the problem. A wheel can fit visually and still fail to match the axle, bracket, stowed envelope or duty cycle. The safest RFQ therefore records total equipment weight, supporting points, floor condition, axle or bracket measurements, expected manoeuvring and quantity before a configuration is released for quotation. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

6 Inch PP Brakeable Jockey Wheel Assembly product family context

Known configuration details for 6 Inch PP Brakeable Jockey Wheel Assembly

6 Inch PP Brakeable Jockey Wheel Assembly is presented as a procurement-ready configuration rather than a one-number commodity. Verified details for this item include wheel: 6 inch PP wheel, wheel diameter / width: 150 x 50 mm wheel, series context: 1200 lb jockey-jack group. Any interface or performance value that is not listed should be confirmed against the equipment before quotation.

For replacement work, photograph the existing assembly from the side and mounting face, then record wheel diameter, wheel width, hub or axle dimensions, overall installed height and nearby clearance. For a new design, include the drawing or mounting envelope. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

Verified specification data for 6 Inch PP Brakeable Jockey Wheel Assembly

该表格将当前配置信息与需要项目确认的项目区分开来。未列出的项目比明确标明的确认点风险更大。

范围	当前配置
车轮	6英寸PP轮
车轮直径/宽度	150 x 50 毫米轮子
Series context	1200 lb jockey-jack group
手术	侧风
表面处理	Galvanized
Brake	Brakeable
组装重量	8.3 kg

Duty conditions to review for 6 Inch PP Brakeable Jockey Wheel Assembly

Trailer drawbar support where parking control at the wheel is required and mounting-board dimensions are confirmed. Selection should still account for floor joints, ramps, side loads, impacts and periods of stationary load. Where the wheel is part of a trailer support assembly, separate the vertical support task from manoeuvring effort and check that the jack can retract or fold without striking the drawbar, coupling or ground.

For equipment carts, usable load per wheel may not equal total load divided by wheel count if the floor is uneven or the frame is not perfectly rigid. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

6 Inch PP Brakeable Jockey Wheel Assembly application context

Load and movement checks for this jockey/support assembly — 6 Inch PP Brakeable Jockey Wheel Assembly

Start with equipment dead weight, maximum payload and the number of wheels that reliably support the frame. Add an application-appropriate allowance for uneven load sharing, floor transitions and impact. For trailer jacks, distinguish the static nose or drawbar load from the effort required to manoeuvre the trailer. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

Wheel diameter influences obstacle crossing and clearance, while material and bearing choice influence rolling behaviour. None of those variables substitutes for the actual rating of the selected assembly. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

Installation interface checks for 6 Inch PP Brakeable Jockey Wheel Assembly

Before release, compare the mounting interface against the equipment. For a loose wheel this means bore or bearing type, axle diameter, hub length, spacers and side clearance. For a jockey or guide-wheel assembly it also includes tube diameter, clamp or plate geometry, fastener access, crank clearance, retracted height and the path used when the assembly swivels or folds. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

除非接头经过专门设计，否则切勿使用临时垫片强行进行近似配合。错位会导致轴承侧向载荷、摩擦和过早磨损。

Material and surface conditions for this jockey/support assembly — 6 Inch PP

Polymer wheel material should be considered together with floor, contamination, cleaning chemicals, noise expectations and temperature. Nylon and polypropylene are hard thermoplastic families, but exact grade and operating environment still matter. Where the listed configuration specifies a galvanized bracket or tube, that finish applies to the stated configuration only. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

如果地面标记、清洗剂化学成分、电气特性或特殊温度要求至关重要，请明确说明。这些要求不应从轮子颜色推断得出。

Incoming and installation checks for 6 Inch PP Brakeable Jockey Wheel Assembly

On receipt, compare the product against approved dimensions and configuration. Check that the wheel rotates without binding, the bore or bearing seats correctly, fasteners are present where specified and the fork or bracket is free from visible deformation. For a jack assembly, operate the crank through usable travel without load first and confirm folding or swivel movement clears the equipment. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

During commissioning, observe the assembly on the real floor at low speed. Look for rubbing, unusual side movement, loose hardware, wheel wobble and interference with guards or frames. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

Information to include when quoting 6 Inch PP Brakeable Jockey Wheel Assembly

产品名称或现有型号参考信息（如有）
散装车轮的轮径、宽度、孔径/轴承和轮毂长度
完整组件的管材、夹具、板材、螺栓孔或轴尺寸
设备最大重量、有效载荷和支撑轮数量
地面或地板、障碍物、化学品和制动要求
所需数量、目的地以及任何图纸或照片

如需更全面的选择指导，请参阅脚轮和车轮选择指南，这测量指南以及相关产品系列.

工程评审

Installation and operating review for 6 Inch PP Brakeable Jockey Wheel Assembly

以产品规格说明为起点，然后解答产品名称本身无法回答的适配性和操作性问题。

Confirm the fit-controlling interface for 6 Inch PP Brakeable Jockey Wheel Assembly

Treat 6 Inch PP Brakeable Jockey Wheel Assembly as a complete support assembly rather than selecting from wheel diameter alone. The currently listed configuration is Wheel: 6 inch PP wheel; Wheel diameter / width: 150 x 50 mm wheel; Series context: 1200 lb jockey-jack group; Operation: Side wind; Surface finish: Galvanized; Brake: Brakeable. These values identify the represented item; they do not replace measurements of the trailer or equipment interface.

Before quotation, record the tube, clamp, bracket or plate geometry that locates the assembly. Check crank access, retracted or stowed clearance, and the path the unit follows if it swivels, folds or lifts. For replacement work, photograph the existing mounting before removal so the relationship between fasteners, support tube and surrounding structure remains visible. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

6 Inch PP Brakeable Jockey Wheel Assembly fit and measurement review

Match 6 Inch PP Brakeable Jockey Wheel Assembly to the real operating condition

Separate the vertical support task from manoeuvring. A listed jack or assembly load belongs to that represented configuration, while real suitability still depends on the actual nose or support load, ground condition, movement pattern and installation. Concrete, paving, gravel and soft ground can change steering effort and the way a small support wheel crosses surface irregularities. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

Check the normal manoeuvring route rather than only a clean workshop floor. Include the most difficult normal surface transition, slope or tight turn in the first controlled test. If the assembly includes a brake or folding feature, verify that the control can be reached and fully engaged without interference from the frame, coupling or stored equipment. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

6 Inch PP Brakeable Jockey Wheel Assembly operating context

Check the first installation of 6 Inch PP Brakeable Jockey Wheel Assembly

Before installation, compare the received unit with the approved dimensions and configuration. Operate moving parts without load first, confirm that the wheel turns freely, and look for visible deformation, damaged threads, missing fasteners or transport damage. Install with the hardware and retention method intended for the equipment rather than compensating for a near-fit with improvised spacers or forced alignment. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

After installation, lower the equipment gradually and observe the assembly under a controlled load. Check that the wheel tracks without rubbing, the support tube remains aligned, fasteners stay seated and the handle or control retains adequate clearance. A short low-speed trial on the actual surface provides more useful acceptance information than spinning the wheel by hand. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

6 Inch PP Brakeable Jockey Wheel Assembly inspection and installation review

Build the 6 Inch PP Brakeable Jockey Wheel Assembly RFQ around measured data

For quotation, keep the represented configuration separate from the equipment-side values that still need confirmation. The current configuration records Wheel: 6 inch PP wheel; Wheel diameter / width: 150 x 50 mm wheel; Series context: 1200 lb jockey-jack group; Operation: Side wind; Surface finish: Galvanized; Brake: Brakeable; Assembly weight: 8.3 kg. These values identify 6 Inch PP Brakeable Jockey Wheel Assembly; they do not establish every mounting dimension, travel limit, duty condition or compatibility point unless those values are also listed.

Complete support assemblies are often rejected for practical fit reasons rather than because a product family is wrong. A tube can be close but not clamp correctly, a handle can lose access when the equipment is loaded, or a wheel can have adequate diameter yet interfere during folding or steering. Show the mounting area, state the actual support condition and identify the ground surface and any envelope that must remain clear. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

For replacement work, include one photograph before removal and one dimensioned sketch. For a new design, include the interface drawing or available installation space. This lets the configuration be reviewed as part of the surrounding structure instead of from wheel appearance alone. Unknown values should remain explicit confirmation points so the quotation does not silently inherit dimensions from another size or series. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

6 Inch PP Brakeable Jockey Wheel Assembly quotation and selection boundary

Questions about 6 Inch PP Brakeable Jockey Wheel Assembly

你能只根据照片引用吗？

照片有助于识别，但可靠的报价通常需要控制尺寸、负载和数量等信息。

轮毂材质可以更换吗？

对于某些家庭来说，材料变更或许是可能的，但等级、荷载、楼层和工艺最低要求必须进行审查。

如何检查替换件是否合适？

尽可能在拆卸前测量现有装置，并比较安装高度、间隙以及车轮尺寸。

一个额定负载就足以选择产品了吗？

不。负载固然重要，但安装方式、地面、车轮材质、直径、轴承布置和工作周期也同样重要。

Request a quote for 6 Inch PP Brakeable Jockey Wheel Assembly

请提供您的尺寸、应用和数量，以便我们在报价前审核关键细节。

索取报价