産業用ホイールおよびサポートアセンブリ

6 Inch PP Brakeable Jockey Wheel Assembly

Name: 6 Inch PP Brakeable Jockey Wheel Assembly | PlasticCastors.com
SKU: PC-JK-6PP-BRK

6 Inch PP Brakeable Jockey Wheel Assembly for B2B equipment or trailer support projects. Specify the fit-controlling interface, duty and quantity for quotation.

車輪
6インチPPホイール

ホイールの直径／幅
150 x 50 mm ホイール

Series context
1200 lb jockey-jack group

手術
横風

この構成を要求する

Where 6 Inch PP Brakeable Jockey Wheel Assembly fits in a selection

The practical value of 6 Inch PP Brakeable Jockey Wheel Assembly appears only when the specification is tied to the equipment that must move, the floor it runs on and the interface that carries the load.

Within trailer drawbar support where parking control at the wheel is required and mounting-board dimensions are confirmed, the actual carried load, wheel/ground contact and attachment geometry should be treated as the first engineering checkpoint. Once that is known, wheel diameter, width, material, bearing arrangement and mounting details can be reviewed in a rational order.

Avoid assuming that a larger wheel, harder polymer or heavier bracket automatically solves the problem. A wheel can fit visually and still fail to match the axle, bracket, stowed envelope or duty cycle. The safest RFQ therefore records total equipment weight, supporting points, floor condition, axle or bracket measurements, expected manoeuvring and quantity before a configuration is released for quotation. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

6 Inch PP Brakeable Jockey Wheel Assembly product family context

Known configuration details for 6 Inch PP Brakeable Jockey Wheel Assembly

6 Inch PP Brakeable Jockey Wheel Assembly is presented as a procurement-ready configuration rather than a one-number commodity. Verified details for this item include wheel: 6 inch PP wheel, wheel diameter / width: 150 x 50 mm wheel, series context: 1200 lb jockey-jack group. Any interface or performance value that is not listed should be confirmed against the equipment before quotation.

For replacement work, photograph the existing assembly from the side and mounting face, then record wheel diameter, wheel width, hub or axle dimensions, overall installed height and nearby clearance. For a new design, include the drawing or mounting envelope. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

Verified specification data for 6 Inch PP Brakeable Jockey Wheel Assembly

この表は、現在の構成情報とプロジェクトで確認が必要な項目を分けて示しています。記載されていない項目は、明確に確認ポイントが示されている項目よりもリスクが高くなります。

パラメータ	現在の構成
車輪	6インチPPホイール
ホイールの直径／幅	150 x 50 mm ホイール
Series context	1200 lb jockey-jack group
手術	横風
Surface finish	Galvanized
Brake	Brakeable
組み立て重量	8.3 kg

Duty conditions to review for 6 Inch PP Brakeable Jockey Wheel Assembly

Trailer drawbar support where parking control at the wheel is required and mounting-board dimensions are confirmed. Selection should still account for floor joints, ramps, side loads, impacts and periods of stationary load. Where the wheel is part of a trailer support assembly, separate the vertical support task from manoeuvring effort and check that the jack can retract or fold without striking the drawbar, coupling or ground.

For equipment carts, usable load per wheel may not equal total load divided by wheel count if the floor is uneven or the frame is not perfectly rigid. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

6 Inch PP Brakeable Jockey Wheel Assembly application context

Load and movement checks for this jockey/support assembly — 6 Inch PP Brakeable Jockey Wheel Assembly

Start with equipment dead weight, maximum payload and the number of wheels that reliably support the frame. Add an application-appropriate allowance for uneven load sharing, floor transitions and impact. For trailer jacks, distinguish the static nose or drawbar load from the effort required to manoeuvre the trailer. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

Wheel diameter influences obstacle crossing and clearance, while material and bearing choice influence rolling behaviour. None of those variables substitutes for the actual rating of the selected assembly. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

Installation interface checks for 6 Inch PP Brakeable Jockey Wheel Assembly

Before release, compare the mounting interface against the equipment. For a loose wheel this means bore or bearing type, axle diameter, hub length, spacers and side clearance. For a jockey or guide-wheel assembly it also includes tube diameter, clamp or plate geometry, fastener access, crank clearance, retracted height and the path used when the assembly swivels or folds. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

接合部がそれに合わせて設計されていない限り、即席のスペーサーを使って無理やりぴったりと嵌め込もうとしないでください。位置ずれはベアリングへの横方向の負荷、摩擦、早期摩耗の原因となります。

Material and surface conditions for this jockey/support assembly — 6 Inch PP

Polymer wheel material should be considered together with floor, contamination, cleaning chemicals, noise expectations and temperature. Nylon and polypropylene are hard thermoplastic families, but exact grade and operating environment still matter. Where the listed configuration specifies a galvanized bracket or tube, that finish applies to the stated configuration only. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

床面表示、洗浄剤、電気的特性、または異常な温度が重要な場合は、それらを明示的に記載してください。これらの要件は、ホイールの色から推測されるべきではありません。

Incoming and installation checks for 6 Inch PP Brakeable Jockey Wheel Assembly

On receipt, compare the product against approved dimensions and configuration. Check that the wheel rotates without binding, the bore or bearing seats correctly, fasteners are present where specified and the fork or bracket is free from visible deformation. For a jack assembly, operate the crank through usable travel without load first and confirm folding or swivel movement clears the equipment. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

During commissioning, observe the assembly on the real floor at low speed. Look for rubbing, unusual side movement, loose hardware, wheel wobble and interference with guards or frames. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

Information to include when quoting 6 Inch PP Brakeable Jockey Wheel Assembly

製品名または既存のモデル番号（入手可能な場合）
ルーズホイールのホイール径、幅、ボア/ベアリング、ハブ長
完成品のチューブ、クランプ、プレート、ボルト穴、または車軸の寸法
最大機器重量、積載量、および支持輪の数
床面または地面、障害物、化学物質、およびブレーキ要件
必要数量、配送先、図面または写真

より広範な選択ガイダンスについては、以下を参照してください。キャスターとホイールの選択ガイド、測定ガイドそして関連製品ファミリー.

エンジニアリングレビュー

Installation and operating review for 6 Inch PP Brakeable Jockey Wheel Assembly

提示された仕様を出発点として、製品名だけでは答えられない適合性や操作性に関する疑問点を解消してください。

Confirm the fit-controlling interface for 6 Inch PP Brakeable Jockey Wheel Assembly

Treat 6 Inch PP Brakeable Jockey Wheel Assembly as a complete support assembly rather than selecting from wheel diameter alone. The currently listed configuration is Wheel: 6 inch PP wheel; Wheel diameter / width: 150 x 50 mm wheel; Series context: 1200 lb jockey-jack group; Operation: Side wind; Surface finish: Galvanized; Brake: Brakeable. These values identify the represented item; they do not replace measurements of the trailer or equipment interface.

Before quotation, record the tube, clamp, bracket or plate geometry that locates the assembly. Check crank access, retracted or stowed clearance, and the path the unit follows if it swivels, folds or lifts. For replacement work, photograph the existing mounting before removal so the relationship between fasteners, support tube and surrounding structure remains visible. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

6 Inch PP Brakeable Jockey Wheel Assembly fit and measurement review

Match 6 Inch PP Brakeable Jockey Wheel Assembly to the real operating condition

Separate the vertical support task from manoeuvring. A listed jack or assembly load belongs to that represented configuration, while real suitability still depends on the actual nose or support load, ground condition, movement pattern and installation. Concrete, paving, gravel and soft ground can change steering effort and the way a small support wheel crosses surface irregularities. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

Check the normal manoeuvring route rather than only a clean workshop floor. Include the most difficult normal surface transition, slope or tight turn in the first controlled test. If the assembly includes a brake or folding feature, verify that the control can be reached and fully engaged without interference from the frame, coupling or stored equipment. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

6 Inch PP Brakeable Jockey Wheel Assembly operating context

Check the first installation of 6 Inch PP Brakeable Jockey Wheel Assembly

Before installation, compare the received unit with the approved dimensions and configuration. Operate moving parts without load first, confirm that the wheel turns freely, and look for visible deformation, damaged threads, missing fasteners or transport damage. Install with the hardware and retention method intended for the equipment rather than compensating for a near-fit with improvised spacers or forced alignment. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

After installation, lower the equipment gradually and observe the assembly under a controlled load. Check that the wheel tracks without rubbing, the support tube remains aligned, fasteners stay seated and the handle or control retains adequate clearance. A short low-speed trial on the actual surface provides more useful acceptance information than spinning the wheel by hand. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

6 Inch PP Brakeable Jockey Wheel Assembly inspection and installation review

Build the 6 Inch PP Brakeable Jockey Wheel Assembly RFQ around measured data

For quotation, keep the represented configuration separate from the equipment-side values that still need confirmation. The current configuration records Wheel: 6 inch PP wheel; Wheel diameter / width: 150 x 50 mm wheel; Series context: 1200 lb jockey-jack group; Operation: Side wind; Surface finish: Galvanized; Brake: Brakeable; Assembly weight: 8.3 kg. These values identify 6 Inch PP Brakeable Jockey Wheel Assembly; they do not establish every mounting dimension, travel limit, duty condition or compatibility point unless those values are also listed.

Complete support assemblies are often rejected for practical fit reasons rather than because a product family is wrong. A tube can be close but not clamp correctly, a handle can lose access when the equipment is loaded, or a wheel can have adequate diameter yet interfere during folding or steering. Show the mounting area, state the actual support condition and identify the ground surface and any envelope that must remain clear. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

For replacement work, include one photograph before removal and one dimensioned sketch. For a new design, include the interface drawing or available installation space. This lets the configuration be reviewed as part of the surrounding structure instead of from wheel appearance alone. Unknown values should remain explicit confirmation points so the quotation does not silently inherit dimensions from another size or series. For 6 Inch PP Brakeable Jockey Wheel Assembly, keep Wheel 6 inch PP wheel and Wheel diameter / width 150 x 50 mm wheel attached to this review so a value from another size or assembly is not substituted during quotation.

6 Inch PP Brakeable Jockey Wheel Assembly quotation and selection boundary

Questions about 6 Inch PP Brakeable Jockey Wheel Assembly

写真だけで引用することはできますか？

写真は識別に役立ちますが、正確な見積もりには通常、適合性を判断するための寸法に加え、荷重と数量の情報が必要です。

ホイールの材質は変更できますか？

一部の世帯では材料の変更が可能な場合もありますが、等級、荷重、床面積、および工程の最低基準を見直す必要があります。

交換部品の適合性はどのように確認すべきですか？

可能であれば、取り外す前に既存のユニットの寸法を測り、設置時の高さとクリアランス、およびホイールサイズを比較してください。

定格負荷が1つあれば、製品選定に十分でしょうか？

いいえ。荷重は重要ですが、取り付け方法、床面、車輪の材質、直径、ベアリングの配置、使用サイクルも重要です。

Request a quote for 6 Inch PP Brakeable Jockey Wheel Assembly

お見積もり前に、寸法、用途、数量をお知らせください。適合性に関する重要な詳細を確認させていただきます。

見積もりを依頼する