Korea Ever-Power Plastic Castor Co., Ltd. · Sandan-ro | Danwon-gu | Ansan-si | Gyeonggi-do | Korea[email protected]
Be om et tilbud

Produktfamilie

Trailer Jockey Wheels

Trailer jockey wheels combine a support wheel with a jack or tube assembly. Buyers should separate support load, manoeuvring, mounting fit, travel and ground condition.

Be om et tilbudUtforsk produkter

What to define before comparing Trailer Jockey Wheels

The practical value of Trailer Jockey Wheels appears only when the specification is tied to the equipment that must move, the floor it runs on and the interface that carries the load.

Within trailer manoeuvring and parking support, the actual load and fit-controlling dimensions should be treated as the first engineering checkpoint. Once that is known, wheel diameter, width, material, bearing arrangement and mounting details can be reviewed in a rational order.

Avoid assuming that a larger wheel, harder polymer or heavier bracket automatically solves the problem. A material or wheel-size label cannot confirm compatibility by itself. The safest RFQ therefore records load, floor, wheel diameter/width, mounting interface, braking need and quantity before a configuration is released for quotation. On Trailer Jockey Wheels, use this point to narrow the family-level choice before treating any individual configuration as a fit for the equipment.

Valg av hjul og hjul
Nåværende rekkevidde

Trailer Jockey Wheels represented in the current range

The live product grid below contains the current configurations represented in this site. Use the grid as a starting point, then compare exact mounting and duty conditions instead of selecting from appearance alone. On Trailer Jockey Wheels, use this point to narrow the family-level choice before treating any individual configuration as a fit for the equipment.

Utvalgsgjennomgang

Compare Trailer Jockey Wheels by support duty, fit and ground condition

Shortlisting this family is most reliable when every candidate is compared against the same application description. Record wheel arrangement, support load, ground condition, tube or clamp interface and usable jack travel before comparing catalogue names or photographs. This keeps the decision tied to the equipment rather than to one attractive feature.

For replacement work, add closed and working height, crank access, stowed clearance and whether a brake or twin-wheel arrangement is required. Where an existing part is worn, bent or repaired, identify the dimensions that may no longer represent the intended geometry. A measured drawing or dimensioned photograph is more useful than treating visible wear as the design target.

When several configurations are being compared, keep required values and optional preferences in separate columns. If a fit-controlling number is not available, leave it as a confirmation item in the RFQ instead of borrowing a value from another size or series. On Trailer Jockey Wheels, use this point to narrow the family-level choice before treating any individual configuration as a fit for the equipment.

Use the Trailer Jockey Wheels page as a family-level filter, not as a substitute for a model check. After the support duty and mounting envelope are defined, compare only configurations whose wheel arrangement and interface can be measured against the equipment. For outdoor or trailer use, include the surface on which the wheel must actually manoeuvre and the clearance available when the support is raised or stowed. If a load, tube size, travel value or brake function is not shown for a specific configuration, ask for confirmation on that model rather than extending a value from another assembly.

Trailer Jockey Wheels selection reference

Selection variables for Trailer Jockey Wheels

Variabel Hvorfor det er viktig
Last per støttepunkt Rammer fordeler ikke alltid den totale massen likt, spesielt på ujevne gulv.
Hjuldiameter Endrer bakkeklaring og geometri for hindringsovergang.
Hjulbredde Endrer kontaktflate og kan ha betydning på mykere underlag.
Materiale Påvirker hardhet, gulvets samspill og miljømessig egnethet.
Boring / lager / aksel Kontrollerer kun hjulmontering uten sidebelastning eller improviserte avstandsstykker.
Brakett / rør / plate Kontrollerer komplett montering og klaring i nærheten.
Bremse-/låsefunksjon Må samsvare med det faktiske kravet til parkering eller retningskontroll.
Hjul- og trinsemål

Where Trailer Jockey Wheels should be evaluated

Trailer Jockey Wheels can appear in trailer manoeuvring and parking support, but the correct configuration is always application-specific. Material handling equipment may spend most of its time on smooth concrete, while trailer support wheels may roll over paving, compacted ground or gravel for short manoeuvring distances. Those are different design conditions.

Describe ramps, floor joints, wash-down, debris, outdoor exposure and expected travel in the enquiry. If the equipment is already in service, a short video can reveal interference or steering behaviour that a static photograph does not show. On Trailer Jockey Wheels, use this point to narrow the family-level choice before treating any individual configuration as a fit for the equipment.

Trailer Jockey Wheels application context

Material, interface and clearance checks — Trailer Jockey Wheels

Do not select a polymer only by colour. Confirm the required material family and, where chemical exposure or unusual temperatures matter, state the environment so the exact grade can be reviewed. For wheel-only replacements, the axle and hub interface is as important as diameter; for complete assemblies, plate, tube or clamp dimensions control whether the product can be mounted safely. On Trailer Jockey Wheels, use this point to narrow the family-level choice before treating any individual configuration as a fit for the equipment.

Where a custom configuration is required, send the existing drawing or a dimensioned sketch. A dimensioned enquiry is faster to evaluate than a request for a visually similar product. On Trailer Jockey Wheels, use this point to narrow the family-level choice before treating any individual configuration as a fit for the equipment.

Rammeverk for valg av hjulmateriale

RFQ checklist for Trailer Jockey Wheels

  • Maksimal utstyrsvekt og lastelast
  • Antall støttehjul eller enheter
  • Hjuldiameter og bredde
  • Detaljer om boring, lager, navlengde eller aksel
  • Dimensjoner for rør, plate, klemme eller bolthull når det er aktuelt
  • Gulv- eller bakkeoverflate, hindringer og rengjøringsmiljø
  • Krav til brems eller retningskontroll
  • Antall og tegning/foto

For en bredere metode, bruk vår veiledning for valg av hjul og måleguideFor arbeid med tilhengerfokus, tilhengerapplikasjonsside legger til bakke- og stueavstandskontroller.

Questions about selecting Trailer Jockey Wheels

Kan jeg velge kun etter hjuldiameter?

Nei. Last, bredde, materiale, lager/aksel eller brakett-grensesnitt og driftstilstand må fortsatt gjennomgås.

Hva om jeg ikke kjenner stoffet?

Send et bilde og forklar gulvet, lasten og miljøet. Materialet skal ikke gjettes ut fra fargen.

Kan forskjellige modeller kombineres i én bestilling?

Blandede modeller kan vurderes kommersielt. Hold hver konfigurasjon på en egen linje med antall og dimensjoner.

Tar dere imot bestillinger på ett stykke i detaljhandelen?

Nettstedet er ment for B2B-prosjekter og produksjonsforespørsler snarere enn detaljhandelskjøp av 1–2 stk. Betalte evalueringsprøver kan vurderes for nye prosjekter.

Discuss your trailer jockey wheels requirement

Send søknaden, mengden og dimensjonene du allerede kjenner til. Manglende tilpasningskritiske detaljer kan gjennomgås før tilbud.

Be om et tilbud