Perakitan Roda dan Penopang Industri

150 mm / 6 Inch Black Polypropylene Wheel

Name: 150 mm / 6 Inch Black Polypropylene Wheel | PlasticCastors.com
SKU: PC-PP-150-B

150 mm / 6 Inch Black Polypropylene Wheel for B2B equipment or trailer support projects. Specify the fit-controlling interface, duty and quantity for quotation.

Diameter roda
150 mm (6 inci nominal)

Lebar roda
50 mm

Bahan
Polipropilena (PP)

Warna
Hitam

Minta Konfigurasi Ini

Where 150 mm / 6 Inch Black Polypropylene Wheel fits in a selection

Procurement teams often encounter 150 mm / 6 Inch Black Polypropylene Wheel as a catalogue term, but the purchasing decision becomes clearer when the term is converted into measurable operating requirements.

In general equipment mobility and replacement-wheel projects requiring a PP wheel and confirmed axle interface, the selection should therefore start with the actual carried load, wheel/ground contact and attachment geometry. That keeps a dimensional or material choice connected to the job it must perform rather than to a generic product description.

The common failure is to treat one attractive parameter as the whole specification. A wheel can fit visually and still fail to match the axle, bracket, stowed envelope or duty cycle. A better purchasing note captures total equipment weight, supporting points, floor condition, axle or bracket measurements, expected manoeuvring and quantity, so suppliers can compare like with like and flag missing dimensions instead of guessing. For 150 mm / 6 Inch Black Polypropylene Wheel, keep Wheel diameter 150 mm (6 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

150 mm / 6 Inch Black Polypropylene Wheel product family context

Known configuration details for 150 mm / 6 Inch Black Polypropylene Wheel

150 mm / 6 Inch Black Polypropylene Wheel is presented as a procurement-ready configuration rather than a one-number commodity. Verified details for this item include wheel diameter: 150 mm (6 in nominal), wheel width: 50 mm, material: Polypropylene (PP). Any interface or performance value that is not listed should be confirmed against the equipment before quotation.

For replacement work, photograph the existing assembly from the side and mounting face, then record wheel diameter, wheel width, hub or axle dimensions, overall installed height and nearby clearance. For a new design, include the drawing or mounting envelope. For 150 mm / 6 Inch Black Polypropylene Wheel, keep Wheel diameter 150 mm (6 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

Verified specification data for 150 mm / 6 Inch Black Polypropylene Wheel

Tabel tersebut memisahkan fakta konfigurasi saat ini dari item yang memerlukan konfirmasi proyek. Angka yang tidak tercantum menimbulkan risiko lebih besar daripada titik konfirmasi yang ditandai dengan jelas.

Parameter	Konfigurasi saat ini
Diameter roda	150 mm (6 inci nominal)
Lebar roda	50 mm
Bahan	Polipropilena (PP)
Warna	Hitam
Konfigurasi	Hanya roda

Duty conditions to review for 150 mm / 6 Inch Black Polypropylene Wheel

General equipment mobility and replacement-wheel projects requiring a pp wheel and confirmed axle interface. Selection should still account for floor joints, ramps, side loads, impacts and periods of stationary load. Where the wheel is part of a trailer support assembly, separate the vertical support task from manoeuvring effort and check that the jack can retract or fold without striking the drawbar, coupling or ground.

For equipment carts, usable load per wheel may not equal total load divided by wheel count if the floor is uneven or the frame is not perfectly rigid. For 150 mm / 6 Inch Black Polypropylene Wheel, keep Wheel diameter 150 mm (6 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

150 mm / 6 Inch Black Polypropylene Wheel application context

Load and movement checks for this industrial wheel — 150 mm / 6 Inch Black Polypropylene Wheel

Start with equipment dead weight, maximum payload and the number of wheels that reliably support the frame. Add an application-appropriate allowance for uneven load sharing, floor transitions and impact. For trailer jacks, distinguish the static nose or drawbar load from the effort required to manoeuvre the trailer. For 150 mm / 6 Inch Black Polypropylene Wheel, keep Wheel diameter 150 mm (6 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

Wheel diameter influences obstacle crossing and clearance, while material and bearing choice influence rolling behaviour. None of those variables substitutes for the actual rating of the selected assembly. For 150 mm / 6 Inch Black Polypropylene Wheel, keep Wheel diameter 150 mm (6 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

Installation interface checks for 150 mm / 6 Inch Black Polypropylene Wheel

Before release, compare the mounting interface against the equipment. For a loose wheel this means bore or bearing type, axle diameter, hub length, spacers and side clearance. For a jockey or guide-wheel assembly it also includes tube diameter, clamp or plate geometry, fastener access, crank clearance, retracted height and the path used when the assembly swivels or folds. For 150 mm / 6 Inch Black Polypropylene Wheel, keep Wheel diameter 150 mm (6 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

Jangan memaksakan pemasangan yang hampir pas dengan menggunakan spacer improvisasi kecuali sambungan tersebut memang dirancang untuk itu. Ketidaksejajaran dapat menyebabkan beban samping pada bantalan, gesekan, dan keausan dini.

Material and surface conditions for this industrial wheel — 150 mm / 6 Inch Black Polypropylene Wheel

Polymer wheel material should be considered together with floor, contamination, cleaning chemicals, noise expectations and temperature. Nylon and polypropylene are hard thermoplastic families, but exact grade and operating environment still matter. Where the listed configuration specifies a galvanized bracket or tube, that finish applies to the stated configuration only. For 150 mm / 6 Inch Black Polypropylene Wheel, keep Wheel diameter 150 mm (6 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

Jika penandaan lantai, komposisi kimia pencucian, sifat kelistrikan, atau suhu yang tidak biasa penting, nyatakan secara eksplisit. Persyaratan tersebut tidak boleh disimpulkan dari warna roda.

Incoming and installation checks for 150 mm / 6 Inch Black Polypropylene Wheel

On receipt, compare the product against approved dimensions and configuration. Check that the wheel rotates without binding, the bore or bearing seats correctly, fasteners are present where specified and the fork or bracket is free from visible deformation. For a jack assembly, operate the crank through usable travel without load first and confirm folding or swivel movement clears the equipment. For 150 mm / 6 Inch Black Polypropylene Wheel, keep Wheel diameter 150 mm (6 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

During commissioning, observe the assembly on the real floor at low speed. Look for rubbing, unusual side movement, loose hardware, wheel wobble and interference with guards or frames. For 150 mm / 6 Inch Black Polypropylene Wheel, keep Wheel diameter 150 mm (6 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

Information to include when quoting 150 mm / 6 Inch Black Polypropylene Wheel

Nama produk atau referensi model yang sudah ada (jika tersedia)
Diameter roda, lebar, lubang/bantalan, dan panjang hub untuk roda lepas.
Dimensi tabung, klem, pelat, lubang baut, atau poros untuk rakitan lengkap.
Berat maksimum peralatan, muatan, dan jumlah roda penopang
Lantai atau tanah, rintangan, bahan kimia, dan persyaratan pengereman.
Jumlah yang dibutuhkan, tujuan pengiriman, dan gambar atau foto (jika ada)

Untuk panduan seleksi yang lebih luas, tinjau panduan pemilihan roda dan kastor, itu panduan pengukuran dan keluarga produk terkait.

Tinjauan teknik

Engineering fit review for 150 mm / 6 Inch Black Polypropylene Wheel

Gunakan spesifikasi yang tercantum sebagai titik awal, kemudian lengkapi pertanyaan terkait kesesuaian dan pengoperasian yang tidak dapat dijawab hanya dari nama produk saja.

Confirm the fit-controlling interface for 150 mm / 6 Inch Black Polypropylene Wheel

150 mm / 6 Inch Black Polypropylene Wheel is a wheel-only configuration, so the axle interface deserves the same attention as the outside dimensions. The represented item currently identifies diameter 150 mm (6 in nominal), width 50 mm, material Polypropylene (PP), configuration Wheel only. Confirm bore or bearing type, axle diameter, hub length, spacer arrangement and side clearance before quotation.

A wheel can match outside diameter and still be unsuitable if the hub geometry changes the installed position or allows the wheel to bind. For replacement work, photograph both sides of the old wheel before removal and record the order of washers, sleeves, spacers and retainers. If the existing part is heavily worn, use stable hub or axle datums rather than copying damage into the target dimensions. For 150 mm / 6 Inch Black Polypropylene Wheel, keep Wheel diameter 150 mm (6 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

150 mm / 6 Inch Black Polypropylene Wheel fit and measurement review

Match 150 mm / 6 Inch Black Polypropylene Wheel to the real operating condition

Penamaan material yang tercantum, Polipropilen (PP), harus ditinjau bersama dengan kondisi lantai sebenarnya, kontaminasi, suhu, dan pola pergerakan. Roda termoplastik keras dapat berperilaku berbeda pada beton halus, sambungan lantai, tanjakan, dan puing-puing. Jangan menyimpulkan perlindungan lantai, tingkat kebisingan, atau kompatibilitas kimia dari warna atau penampilan jika persyaratan tersebut belum ditentukan.

For mobile equipment, start with the full equipment mass and payload, then identify how many wheels reliably share the load. Uneven floors and frame flexibility can prevent equal load sharing. Wheel diameter affects obstacle-crossing geometry and installed clearance, while width changes contact area; neither value by itself confirms suitability for the duty. For 150 mm / 6 Inch Black Polypropylene Wheel, keep Wheel diameter 150 mm (6 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

150 mm / 6 Inch Black Polypropylene Wheel operating context

Check the first installation of 150 mm / 6 Inch Black Polypropylene Wheel

Before installation, rotate the wheel on the intended axle or bearing arrangement and check free movement, side clearance and retention. Confirm that the wheel does not contact guards, brackets or adjacent components through the usable range of motion. Fasteners and axle hardware should seat on the intended surfaces rather than being used to force a misaligned hub into position. For 150 mm / 6 Inch Black Polypropylene Wheel, keep Wheel diameter 150 mm (6 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

During first use, move the equipment at low speed over the normal route and observe rubbing, wobble, unusual side movement, fastener movement and any change in operator effort. If the route includes a threshold, dock plate or rough joint, include it in the trial. Where a symptom appears, change one variable at a time so the cause is not hidden by a complete assembly swap. For 150 mm / 6 Inch Black Polypropylene Wheel, keep Wheel diameter 150 mm (6 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

150 mm / 6 Inch Black Polypropylene Wheel inspection and installation review

Build the 150 mm / 6 Inch Black Polypropylene Wheel RFQ around measured data

For quotation, separate the values already identified for 150 mm / 6 Inch Black Polypropylene Wheel from the dimensions that belong to the machine. The current configuration records Wheel diameter: 150 mm (6 in nominal); Wheel width: 50 mm; Material: Polypropylene (PP); Colour: Black; Configuration: Wheel only. Those details establish the represented wheel, but they do not establish the axle, bearing, spacer or load condition unless those values are also listed for the item.

A replacement-wheel enquiry becomes more reliable when the buyer records both sides of the hub, the axle diameter, usable hub length, retention method and side clearance. If a bearing is present, identify the bearing arrangement rather than assuming that the visible bore is the running interface. Also state whether wear may have changed the measured outside diameter or width, because a damaged part is not always a dependable dimensional master. For 150 mm / 6 Inch Black Polypropylene Wheel, keep Wheel diameter 150 mm (6 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

For a new equipment design, provide the wheel position in the frame and the expected floor route as well as nominal load. This allows diameter, width and material to be reviewed alongside ground clearance, obstacle crossing and neighbouring components. Where a value remains unknown, mark it for confirmation instead of substituting a number from a visually similar wheel. That produces a cleaner comparison and reduces interface mismatch at installation. For 150 mm / 6 Inch Black Polypropylene Wheel, keep Wheel diameter 150 mm (6 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

150 mm / 6 Inch Black Polypropylene Wheel quotation and selection boundary

Questions about 150 mm / 6 Inch Black Polypropylene Wheel

Bisakah Anda memberikan kutipan hanya dari foto?

Foto membantu identifikasi, tetapi penawaran harga yang andal biasanya membutuhkan dimensi yang mengontrol ukuran, ditambah beban dan kuantitas.

Apakah material roda bisa diganti?

Perubahan material mungkin dimungkinkan untuk beberapa jenis produk, tetapi standar minimum mutu, beban, luas lantai, dan proses harus ditinjau ulang.

Bagaimana cara memeriksa kesesuaian penggantian?

Jika memungkinkan, ukur unit yang ada sebelum dilepas dan bandingkan tinggi dan jarak bebas setelah pemasangan, serta ukuran roda.

Apakah satu kapasitas beban terukur sudah cukup untuk memilih produk tersebut?

Tidak. Beban adalah hal penting, tetapi pemasangan, lantai, material roda, diameter, susunan bantalan, dan siklus kerja juga penting.