産業用ホイールおよびサポートアセンブリ

200 mm / 8 Inch Nylon Wheel

Name: 200 mm / 8 Inch Nylon Wheel | PlasticCastors.com
SKU: PC-NW-200

200 mm / 8 Inch Nylon Wheel for B2B equipment or trailer support projects. Specify the fit-controlling interface, duty and quantity for quotation.

ホイール直径
200 mm (公称8インチ)

ホイール幅
50mm

材料
ナイロン

構成
ホイールのみ

この構成を要求する

Where 200 mm / 8 Inch Nylon Wheel fits in a selection

The practical value of 200 mm / 8 Inch Nylon Wheel appears only when the specification is tied to the equipment that must move, the floor it runs on and the interface that carries the load.

Within larger-diameter replacement and support-wheel applications where floor joints or clearance make diameter important, the actual carried load, wheel/ground contact and attachment geometry should be treated as the first engineering checkpoint. Once that is known, wheel diameter, width, material, bearing arrangement and mounting details can be reviewed in a rational order.

Avoid assuming that a larger wheel, harder polymer or heavier bracket automatically solves the problem. A wheel can fit visually and still fail to match the axle, bracket, stowed envelope or duty cycle. The safest RFQ therefore records total equipment weight, supporting points, floor condition, axle or bracket measurements, expected manoeuvring and quantity before a configuration is released for quotation. For 200 mm / 8 Inch Nylon Wheel, keep Wheel diameter 200 mm (8 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

200 mm / 8 Inch Nylon Wheel product family context

Known configuration details for 200 mm / 8 Inch Nylon Wheel

200 mm / 8 Inch Nylon Wheel is presented as a procurement-ready configuration rather than a one-number commodity. Verified details for this item include wheel diameter: 200 mm (8 in nominal), wheel width: 50 mm, material: Nylon. Any interface or performance value that is not listed should be confirmed against the equipment before quotation.

For replacement work, photograph the existing assembly from the side and mounting face, then record wheel diameter, wheel width, hub or axle dimensions, overall installed height and nearby clearance. For a new design, include the drawing or mounting envelope. For 200 mm / 8 Inch Nylon Wheel, keep Wheel diameter 200 mm (8 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

Verified specification data for 200 mm / 8 Inch Nylon Wheel

この表は、現在の構成情報とプロジェクトで確認が必要な項目を分けて示しています。記載されていない項目は、明確に確認ポイントが示されている項目よりもリスクが高くなります。

パラメータ	現在の構成
ホイール直径	200 mm (公称8インチ)
ホイール幅	50mm
材料	ナイロン
構成	ホイールのみ
取り付けインターフェース	RFQで車軸/ボアの要件を確認してください

Duty conditions to review for 200 mm / 8 Inch Nylon Wheel

Larger-diameter replacement and support-wheel applications where floor joints or clearance make diameter important. Selection should still account for floor joints, ramps, side loads, impacts and periods of stationary load. Where the wheel is part of a trailer support assembly, separate the vertical support task from manoeuvring effort and check that the jack can retract or fold without striking the drawbar, coupling or ground.

For equipment carts, usable load per wheel may not equal total load divided by wheel count if the floor is uneven or the frame is not perfectly rigid. For 200 mm / 8 Inch Nylon Wheel, keep Wheel diameter 200 mm (8 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

200 mm / 8 Inch Nylon Wheel application context

Load and movement checks for this industrial wheel — 200 mm / 8 Inch Nylon Wheel

Start with equipment dead weight, maximum payload and the number of wheels that reliably support the frame. Add an application-appropriate allowance for uneven load sharing, floor transitions and impact. For trailer jacks, distinguish the static nose or drawbar load from the effort required to manoeuvre the trailer. For 200 mm / 8 Inch Nylon Wheel, keep Wheel diameter 200 mm (8 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

Wheel diameter influences obstacle crossing and clearance, while material and bearing choice influence rolling behaviour. None of those variables substitutes for the actual rating of the selected assembly. For 200 mm / 8 Inch Nylon Wheel, keep Wheel diameter 200 mm (8 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

Installation interface checks for 200 mm / 8 Inch Nylon Wheel

Before release, compare the mounting interface against the equipment. For a loose wheel this means bore or bearing type, axle diameter, hub length, spacers and side clearance. For a jockey or guide-wheel assembly it also includes tube diameter, clamp or plate geometry, fastener access, crank clearance, retracted height and the path used when the assembly swivels or folds. For 200 mm / 8 Inch Nylon Wheel, keep Wheel diameter 200 mm (8 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

接合部がそれに合わせて設計されていない限り、即席のスペーサーを使って無理やりぴったりと嵌め込もうとしないでください。位置ずれはベアリングへの横方向の負荷、摩擦、早期摩耗の原因となります。

Material and surface conditions for this industrial wheel — 200 mm / 8 Inch Nylon Wheel

Polymer wheel material should be considered together with floor, contamination, cleaning chemicals, noise expectations and temperature. Nylon and polypropylene are hard thermoplastic families, but exact grade and operating environment still matter. Where the listed configuration specifies a galvanized bracket or tube, that finish applies to the stated configuration only. For 200 mm / 8 Inch Nylon Wheel, keep Wheel diameter 200 mm (8 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

床面表示、洗浄剤、電気的特性、または異常な温度が重要な場合は、それらを明示的に記載してください。これらの要件は、ホイールの色から推測されるべきではありません。

Incoming and installation checks for 200 mm / 8 Inch Nylon Wheel

On receipt, compare the product against approved dimensions and configuration. Check that the wheel rotates without binding, the bore or bearing seats correctly, fasteners are present where specified and the fork or bracket is free from visible deformation. For a jack assembly, operate the crank through usable travel without load first and confirm folding or swivel movement clears the equipment. For 200 mm / 8 Inch Nylon Wheel, keep Wheel diameter 200 mm (8 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

During commissioning, observe the assembly on the real floor at low speed. Look for rubbing, unusual side movement, loose hardware, wheel wobble and interference with guards or frames. For 200 mm / 8 Inch Nylon Wheel, keep Wheel diameter 200 mm (8 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

Information to include when quoting 200 mm / 8 Inch Nylon Wheel

製品名または既存のモデル番号（入手可能な場合）
ルーズホイールのホイール径、幅、ボア/ベアリング、ハブ長
完成品のチューブ、クランプ、プレート、ボルト穴、または車軸の寸法
最大機器重量、積載量、および支持輪の数
床面または地面、障害物、化学物質、およびブレーキ要件
必要数量、配送先、図面または写真

より広範な選択ガイダンスについては、以下を参照してください。キャスターとホイールの選択ガイド、測定ガイドそして関連製品ファミリー.

エンジニアリングレビュー

Engineering fit review for 200 mm / 8 Inch Nylon Wheel

提示された仕様を出発点として、製品名だけでは答えられない適合性や操作性に関する疑問点を解消してください。

Confirm the fit-controlling interface for 200 mm / 8 Inch Nylon Wheel

200 mm / 8 Inch Nylon Wheel is a wheel-only configuration, so the axle interface deserves the same attention as the outside dimensions. The represented item currently identifies diameter 200 mm (8 in nominal), width 50 mm, material Nylon, configuration Wheel only. Confirm bore or bearing type, axle diameter, hub length, spacer arrangement and side clearance before quotation.

A wheel can match outside diameter and still be unsuitable if the hub geometry changes the installed position or allows the wheel to bind. For replacement work, photograph both sides of the old wheel before removal and record the order of washers, sleeves, spacers and retainers. If the existing part is heavily worn, use stable hub or axle datums rather than copying damage into the target dimensions. For 200 mm / 8 Inch Nylon Wheel, keep Wheel diameter 200 mm (8 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

200 mm / 8 Inch Nylon Wheel fit and measurement review

Match 200 mm / 8 Inch Nylon Wheel to the real operating condition

記載されている材質（ナイロン）は、実際の床の状態、汚染状況、温度、および移動パターンと併せて検討する必要があります。硬質熱可塑性樹脂製の車輪は、滑らかなコンクリート面、床の継ぎ目、スロープ、および破片の上では異なる挙動を示す可能性があります。床の保護性能、騒音レベル、または化学的適合性については、これらの要件が明記されていない限り、色や外観から推測しないでください。

For mobile equipment, start with the full equipment mass and payload, then identify how many wheels reliably share the load. Uneven floors and frame flexibility can prevent equal load sharing. Wheel diameter affects obstacle-crossing geometry and installed clearance, while width changes contact area; neither value by itself confirms suitability for the duty. For 200 mm / 8 Inch Nylon Wheel, keep Wheel diameter 200 mm (8 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

200 mm / 8 Inch Nylon Wheel operating context

Check the first installation of 200 mm / 8 Inch Nylon Wheel

Before installation, rotate the wheel on the intended axle or bearing arrangement and check free movement, side clearance and retention. Confirm that the wheel does not contact guards, brackets or adjacent components through the usable range of motion. Fasteners and axle hardware should seat on the intended surfaces rather than being used to force a misaligned hub into position. For 200 mm / 8 Inch Nylon Wheel, keep Wheel diameter 200 mm (8 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

During first use, move the equipment at low speed over the normal route and observe rubbing, wobble, unusual side movement, fastener movement and any change in operator effort. If the route includes a threshold, dock plate or rough joint, include it in the trial. Where a symptom appears, change one variable at a time so the cause is not hidden by a complete assembly swap. For 200 mm / 8 Inch Nylon Wheel, keep Wheel diameter 200 mm (8 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

200 mm / 8 Inch Nylon Wheel inspection and installation review

Build the 200 mm / 8 Inch Nylon Wheel RFQ around measured data

For quotation, separate the values already identified for 200 mm / 8 Inch Nylon Wheel from the dimensions that belong to the machine. The current configuration records Wheel diameter: 200 mm (8 in nominal); Wheel width: 50 mm; Material: Nylon; Configuration: Wheel only; Mounting interface: Confirm axle/bore requirement in RFQ. Those details establish the represented wheel, but they do not establish the axle, bearing, spacer or load condition unless those values are also listed for the item.

A replacement-wheel enquiry becomes more reliable when the buyer records both sides of the hub, the axle diameter, usable hub length, retention method and side clearance. If a bearing is present, identify the bearing arrangement rather than assuming that the visible bore is the running interface. Also state whether wear may have changed the measured outside diameter or width, because a damaged part is not always a dependable dimensional master. For 200 mm / 8 Inch Nylon Wheel, keep Wheel diameter 200 mm (8 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

For a new equipment design, provide the wheel position in the frame and the expected floor route as well as nominal load. This allows diameter, width and material to be reviewed alongside ground clearance, obstacle crossing and neighbouring components. Where a value remains unknown, mark it for confirmation instead of substituting a number from a visually similar wheel. That produces a cleaner comparison and reduces interface mismatch at installation. For 200 mm / 8 Inch Nylon Wheel, keep Wheel diameter 200 mm (8 in nominal) and Wheel width 50 mm attached to this review so a value from another size or assembly is not substituted during quotation.

200 mm / 8 Inch Nylon Wheel quotation and selection boundary

Questions about 200 mm / 8 Inch Nylon Wheel

写真だけで引用することはできますか？

写真は識別に役立ちますが、正確な見積もりには通常、適合性を判断するための寸法に加え、荷重と数量の情報が必要です。

ホイールの材質は変更できますか？

一部の世帯では材料の変更が可能な場合もありますが、等級、荷重、床面積、および工程の最低基準を見直す必要があります。

交換部品の適合性はどのように確認すべきですか？

可能であれば、取り外す前に既存のユニットの寸法を測り、設置時の高さとクリアランス、およびホイールサイズを比較してください。

定格負荷が1つあれば、製品選定に十分でしょうか？

いいえ。荷重は重要ですが、取り付け方法、床面、車輪の材質、直径、ベアリングの配置、使用サイクルも重要です。

Request a quote for 200 mm / 8 Inch Nylon Wheel

お見積もり前に、寸法、用途、数量をお知らせください。適合性に関する重要な詳細を確認させていただきます。

見積もりを依頼する