Korea Ever-Power Plastic Castor Co., Ltd. · Sandan-ro | Danwon-gu | Ansan-si | Gyeonggi-do | Korea[email protected]
Permintaan Penawaran

Keluarga Produk

Trailer Jockey Wheels

Trailer jockey wheels combine a support wheel with a jack or tube assembly. Buyers should separate support load, manoeuvring, mounting fit, travel and ground condition.

Permintaan PenawaranJelajahi Produk

What to define before comparing Trailer Jockey Wheels

The practical value of Trailer Jockey Wheels appears only when the specification is tied to the equipment that must move, the floor it runs on and the interface that carries the load.

Within trailer manoeuvring and parking support, the actual load and fit-controlling dimensions should be treated as the first engineering checkpoint. Once that is known, wheel diameter, width, material, bearing arrangement and mounting details can be reviewed in a rational order.

Avoid assuming that a larger wheel, harder polymer or heavier bracket automatically solves the problem. A material or wheel-size label cannot confirm compatibility by itself. The safest RFQ therefore records load, floor, wheel diameter/width, mounting interface, braking need and quantity before a configuration is released for quotation. On Trailer Jockey Wheels, use this point to narrow the family-level choice before treating any individual configuration as a fit for the equipment.

Alur pemilihan roda dan kastor
Rentang Saat Ini

Trailer Jockey Wheels represented in the current range

The live product grid below contains the current configurations represented in this site. Use the grid as a starting point, then compare exact mounting and duty conditions instead of selecting from appearance alone. On Trailer Jockey Wheels, use this point to narrow the family-level choice before treating any individual configuration as a fit for the equipment.

Tinjauan seleksi

Compare Trailer Jockey Wheels by support duty, fit and ground condition

Shortlisting this family is most reliable when every candidate is compared against the same application description. Record wheel arrangement, support load, ground condition, tube or clamp interface and usable jack travel before comparing catalogue names or photographs. This keeps the decision tied to the equipment rather than to one attractive feature.

For replacement work, add closed and working height, crank access, stowed clearance and whether a brake or twin-wheel arrangement is required. Where an existing part is worn, bent or repaired, identify the dimensions that may no longer represent the intended geometry. A measured drawing or dimensioned photograph is more useful than treating visible wear as the design target.

When several configurations are being compared, keep required values and optional preferences in separate columns. If a fit-controlling number is not available, leave it as a confirmation item in the RFQ instead of borrowing a value from another size or series. On Trailer Jockey Wheels, use this point to narrow the family-level choice before treating any individual configuration as a fit for the equipment.

Use the Trailer Jockey Wheels page as a family-level filter, not as a substitute for a model check. After the support duty and mounting envelope are defined, compare only configurations whose wheel arrangement and interface can be measured against the equipment. For outdoor or trailer use, include the surface on which the wheel must actually manoeuvre and the clearance available when the support is raised or stowed. If a load, tube size, travel value or brake function is not shown for a specific configuration, ask for confirmation on that model rather than extending a value from another assembly.

Trailer Jockey Wheels selection reference

Selection variables for Trailer Jockey Wheels

Variabel Mengapa ini penting
Beban per titik tumpuan Rangka tidak selalu mendistribusikan massa total secara merata, terutama pada lantai yang tidak rata.
Diameter roda Mengubah jarak bebas ke tanah dan geometri penyeberangan rintangan.
Lebar roda Mengubah area kontak dan dapat berpengaruh pada permukaan tanah yang lebih lunak.
Bahan Memengaruhi kekerasan, interaksi lantai, dan kesesuaian lingkungan.
Lubang / bantalan / poros Mengontrol pemasangan roda saja tanpa beban samping atau spacer improvisasi.
Braket / tabung / pelat Mengontrol kesesuaian perakitan lengkap dan jarak bebas di sekitarnya.
Fungsi rem/kunci Harus sesuai dengan persyaratan parkir atau pengendalian arah yang sebenarnya.
Pengukuran roda dan kastor

Where Trailer Jockey Wheels should be evaluated

Trailer Jockey Wheels can appear in trailer manoeuvring and parking support, but the correct configuration is always application-specific. Material handling equipment may spend most of its time on smooth concrete, while trailer support wheels may roll over paving, compacted ground or gravel for short manoeuvring distances. Those are different design conditions.

Describe ramps, floor joints, wash-down, debris, outdoor exposure and expected travel in the enquiry. If the equipment is already in service, a short video can reveal interference or steering behaviour that a static photograph does not show. On Trailer Jockey Wheels, use this point to narrow the family-level choice before treating any individual configuration as a fit for the equipment.

Trailer Jockey Wheels application context

Material, interface and clearance checks — Trailer Jockey Wheels

Do not select a polymer only by colour. Confirm the required material family and, where chemical exposure or unusual temperatures matter, state the environment so the exact grade can be reviewed. For wheel-only replacements, the axle and hub interface is as important as diameter; for complete assemblies, plate, tube or clamp dimensions control whether the product can be mounted safely. On Trailer Jockey Wheels, use this point to narrow the family-level choice before treating any individual configuration as a fit for the equipment.

Where a custom configuration is required, send the existing drawing or a dimensioned sketch. A dimensioned enquiry is faster to evaluate than a request for a visually similar product. On Trailer Jockey Wheels, use this point to narrow the family-level choice before treating any individual configuration as a fit for the equipment.

Kerangka kerja pemilihan material roda

RFQ checklist for Trailer Jockey Wheels

  • Berat maksimum peralatan dan beban yang dapat diangkut
  • Jumlah roda atau rakitan penopang
  • Diameter dan lebar roda
  • Detail lubang, bantalan, panjang hub, atau poros.
  • Dimensi tabung, pelat, klem, atau lubang baut jika berlaku.
  • Permukaan lantai atau tanah, rintangan, dan lingkungan pembersihan.
  • Persyaratan rem atau kontrol arah
  • Jumlah dan gambar/foto

Untuk metode yang lebih luas, gunakan metode kami. panduan pemilihan roda Dan panduan pengukuranUntuk pekerjaan yang berfokus pada trailer, halaman aplikasi trailer menambahkan pemeriksaan jarak bebas tanah dan penyimpanan.

Questions about selecting Trailer Jockey Wheels

Bisakah saya memilih hanya berdasarkan diameter roda?

Tidak. Beban, lebar, material, antarmuka bantalan/poros atau braket, dan kondisi kerja masih perlu ditinjau.

Bagaimana jika saya tidak mengetahui materi tersebut?

Kirim foto dan jelaskan kondisi lantai, beban, dan lingkungannya. Material tidak boleh ditebak hanya dari warnanya.

Apakah model yang berbeda dapat digabungkan dalam satu pesanan?

Model campuran dapat ditinjau secara komersial. Pisahkan setiap konfigurasi pada baris terpisah dengan jumlah dan dimensi.

Apakah Anda menerima pesanan ritel satuan?

Situs ini ditujukan untuk pertanyaan proyek dan produksi B2B, bukan untuk pembelian ritel 1-2 unit. Sampel evaluasi berbayar dapat dipertimbangkan untuk proyek baru.

Discuss your trailer jockey wheels requirement

Kirimkan formulir aplikasi, jumlah, dan dimensi yang sudah Anda ketahui. Detail penting yang mungkin kurang dapat ditinjau sebelum penawaran harga.

Permintaan Penawaran